Sponge-nested polymer monoliths: Versatile materials for the solid-phase extraction of bisphenols

Polymer monoliths are promising materials for sample preparation due to their high porosity, pH stability, and simple preparation. The use of melamine formaldehyde foams has been reported as an effective support to prepare highly robust silica and polymer monoliths. Herein, divinylbenzene monoliths based on a 50:50 (%, w/w) crosslinker/porogen ratio have been nested within a melamine-formaldehyde sponge, resulting in monoliths with a surface area higher than 400 m²/g. The extraction performance of these monoliths was evaluated for the extraction of endocrine-disrupting bisphenols from aqueous solutions. We evaluated for the first time the versatility of sponge-nested polymer monoliths by comparing three different extraction modes (vortex mixing, magnetic stirring, and orbital shaking). Vortex mixing showed a comparable recovery of bisphenols (39%–81%) in a shorter extraction time (30 min, instead of 2 h). In addition, the robustness of the sponge-nested polymer monoliths was demonstrated for the first time by reshaping a larger monolithic cube (0.125 cm³) into four smaller pieces (4 × 0.03125 cm³) leading to a 16%–21% increase in extraction efficiency. This effect was attributed to an increase in the effective contact area with the sample, obtaining a higher analyte extraction capacity.     

Novel sponge-like molecularly imprinted mesoporous silica material for selective isolation of bisphenol A and its analogues from sediment extracts

Bisphenol A (BPA) imprinted sponge mesoporous silica was synthesized using a combination of semi-covalent molecular imprinting and simple self-assembly process. The molecularly imprinted sponge mesoporous silica (MISMS) material obtained was characterized by FT-IR, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption measurements. The results show that the MISMS possessed a large specific surface area (850.55 m² g⁻¹) and a highly interconnected 3-D porous network. As a result, the MISMS demonstrated a superior specific adsorption capacity of 169.22 μmol g⁻¹ and fast adsorption kinetics (reaching equilibrium within 3 min) for BPA. Good class selectivity for BPA and its analogues (bisphenol F, bisphenol B, bisphenol E and bisphenol AF) was also demonstrated by the sorption experiment. The MISMS as solid-phase extraction (SPE) material was then evaluated for isolation and clean-up of these bisphenols (BPs) from sediment samples. An accurate and sensitive analytical method based on the MISMS–SPE coupled with HPLC–DAD has been successfully established for simultaneous determination of five BPs in river sediments with detection limits of 0.43–0.71 ng g⁻¹ dry weight (dw). The recoveries of BPs for lyophilizated sediment samples at two spiking levels (50 and 500 ng g⁻¹ dw for each BP) were in the range of 75.5–105.5% with RSD values below 7.5%.     

Reaction of 2-trifluoroacetyl-1,8-Bis(dimethylamino)naphthalene with strong organic bases: Deprotonation of 1-NMe2 group resulting in the formation of Benzo[g]indole derivatives versus nucleophilic addition to CO group

A novel approach to pyrrole ring closure in 2-trifluoroacetyl- and 2-ethoxycarbonyl-1,8-bis(dimethylamino)naphthalenes via treatment with 2-lithium-1,8-bis(dimethylamino)naphthalene producing the corresponding benzo[g]indole derivatives, was examined with different alkyl- and aryllithium compounds as well as with LDA. It was found that the highest yields of benzo[g]indoles (up to 70%) are obtained with aryllithium reagents when they contain NMe₂ group in ortho-position to the carbanionic centre. In all other cases the formation of acyclic alcohol arising from ordinary intermolecular addition of the carbanion to the CO group strongly prevails. The dramatic facilitation of deprotonation of the N-Me group in substrate followed by pyrrolic cyclization in the case of 2-lithium-N,N-dimethylanilines was explained through a specific structure of the reaction transition state.     

Structural Elucidation of Trace Amounts of Volatile Compounds Using the Crystalline Sponge Method

Volatile organic compounds are widely present as scents and odors in our daily lives and are readily found in a variety of natural extracts. Because these compounds are highly volatile and usually available only in minute quantities, little attention has been paid to X‐ray diffraction as a technique for their structure determination. Here, we show that the structures of volatile organic compounds are easily elucidated using minute quantities of the compounds and the crystalline sponge method. The compound vapors can be directly absorbed into the sponge crystals, or alternatively, preparative gas chromatography can be used to separate the desired compound from a natural mixture.     

聚乙烯醇载银海绵的制备及界面光热驱动水蒸发性能

利用光热材料的太阳能水蒸发技术是一种绿色、 环保地解决淡水资源短缺的重要技术, 但光热材料的制备成本、 蒸发效率和热损失等因素限制了其推广应用. 本文采用一锅法制备了聚乙烯醇载银海绵(AgNPs/PVA)太阳能界面蒸发器, 并研究了AgNPs含量对AgNPs/PVA在太阳能驱动水蒸发过程中光热性能的影响. 研究结果表明, 当AgNPs的质量为PVA的10%时, 制备的AgNPs/PVA在1 kW/m ²的太阳光强度下具有最优的蒸发速率, 水蒸发速率可达1.62 kg?m ^?2?h ^?1, 为纯水(0.42 kg?m ^?2?h ^?1)的3.9倍. 本文制备的AgNPs/PVA具有制备工艺简单、 亲水性能优良和蒸发性能良好的特点, 在太阳能驱动水蒸发领域具有较大的应用前景.     

Ishigadine A,a new canthin-6-one alkaloid from an Okinawan marine sponge Hyrtios sp.

A new indole alkaloid with the canthin-6-one skeleton, ishigadine A, has been isolated from an Okinawan marine sponge Hyrtios sp. The structure of ishigadine A was elucidated on the basis of spectroscopic analyses. Ishigadine A is a new canthin-6-one alkaloid possessing a hydroxy group, a 1,3-dimethyl-4-methylthioimidazolium, and a 1-propylguanidine. Ishigadine A is the third canthin-6-one alkaloid from sponges. Ishigadine A might be generated from l-arginine, l-histidine, and l-tryptophan. Ishigadine A exhibited moderate cytotoxicity against L1210 murine leukemia cells.     

Superhydrophobic MoS2-based multifunctional sponge for recovery and detection of spilled oil

Oil spills are a major threat to the marine ecosystem, requiring immediate solutions to remove spilled oil from oceanic environments. In this study, we report a superhydrophobic molybdenum disulfide (MoS₂) coated polydimethylsiloxane (PDMS) sponge and demonstrate its high proficiency in spilled oil recovery and oil spill detection based on oil-water separation ability. This novel oil sorbent is fabricated by a simple dip-coating to incorporate MoS₂ flakes into PDMS sponge. The optimized MoS₂-sponge displays a water contact angle of >152°, demonstrating excellent superhydrophobicity and high oil absorption (>97 wt%) for a variety of oils, including vegetable oil and fuel waste. Moreover, the material retains excellent oil absorption capability upon repetitive compression cycles. The versatility of this novel sorbent has been extended for the real-time spontaneous detection of oils by taking advantage of electrically conductive MoS₂ layers.     

Euryjanicins E–G,poly-phenylalanine,and poly-proline cyclic heptapeptides from the Caribbean sponge Prosuberites laughlini

A new investigation of the active sponge extracts of Prosuberites laughlini collected off the West coast of Puerto Rico has yielded three new cyclic heptapeptides, namely euryjanicins E (1)–G (3), containing multiple phenylalanine and proline residues. In CDCl₃ solution, each euryjanicin F (2) and G (3) exists as an inseparable complex mixture of conformational isomers. The molecular structures of 1–3 were elucidated by a combination of chemical degradation, extensive ESI-MS/MSⁿ analyses, and 2D NMR methods. The elucidation of the absolute configuration was achieved by HPLC following analysis of the acid hydrolysates after derivatization with Marfey's reagent. When assayed against the National Cancer Institute 60 tumor cell line panel, the new cyclic peptides did not display significant in vitro cytotoxicity.     

Effective removal of cation dyes from aqueous solution using robust cellulose sponge

Cellulose sponge was proposed to an attractive bio-absorbent owing to its highly efficient, low-cost, biodegradable, and renewable sourcing. In this work, the wasted cotton linter as raw materials, the highly porous and lightweight cellulose sponges were synthesized via a facile chemical crosslinking and freeze-drying process. The resultant cellulose sponge (CA) exhibited an interconnected three-dimensional porous structure through crosslinked with N,N′-methylene bisacrylamide (MBA), which was beneficial to remove organic dyestuffs. The effects of various factors including solution pH, contact time, initial dye concentration, and ionic strength on the adsorption behavior were investigated in detail. Herein, Langmuir isotherm models were selected to determine the adsorption capacity, and the maximum theoretical adsorption capacity for Methylene blue (MB) and Crystal violet (CV) was 123.46 and 76.63 mg/g, respectively. Particularly, the results of kinetic and thermodynamic tests showed that the adsorption performance was a spontaneous endothermic reaction and the adsorption process followed the pseudo-second-order kinetic. Furthermore, cellulose sponges could maintain maximum adsorption capacity even after twelve cycles. Therefore, the eco-friendly cellulose sponge would be a promising adsorbent for effective wastewater treatment.     

β-secretase 1 inhibitory activity and AMP-activated protein kinase activation of Callyspongia samarensis extracts

Abstract

The methanolic extract of Callyspongia samarensis (MCS) significantly inhibited β-secretase 1 (IC₅₀ 99.82?µg/mL) in a dose-dependent manner and demonstrated a noncompetitive type of inhibition. Furthermore, it exhibited the highest AMPK activation (EC₅₀ 14.47?μg/mL) as compared with the standard, Aspirin (EC₅₀ >100?μg/mL). HPLC/ESI-MS analysis of MCS extract revealed 15 peaks, in which nine peaks demonstrated similar fragmentation pattern with the known compounds in literature and in database library: 5-aminopentanoic acid (1), 4-aminobutanoic acid (3), Luotonin A (4), (E)-3-(1H-imidazol-5-yl) prop-2-enoic acid (8), Galactosphingosine (10), D-sphingosine (11), 5,7,4′-trihydroxy-3′,5′-dimethoxyflavone (12), hydroxydihydrovolide (13), and 3,5-dibromo-4-methoxyphenylpyruvic acid (14); and 6 peaks are not identified (2, 5–7, 9, and 15). Acute oral toxicity test of MCS extract revealed that it is nontoxic, with an LD₅₀ of >2000?mg/kg. Assessment of BBB permeability of MCS extract showed that compound 15 was able to cross the BBB making it a suitable candidate for developing CNS drugs.